Home > Porter-Cable Tool Index
Palm Nailer Kit
Model # PN650
- Capacity 1-1/4" to 6-1/2" nails (3d to 70d)
- Comes with four different nose tips:
* "No Mar" finish tip: for finish nail up to 3d
* Magnetic tip: for driving 3d to 16d common nails
* Standard tip: for common nails up to 70d
* Steel hammer kit: for moldings, dowels, automotive body work
- Ergonomic compact design for added comfort
- Depth-of-drive control
- Plenty of power for 6-1/2" nail
- Glove with padded Velcro strap
- Standard Equipment: Nailer, glove, magnetic tip, non-marring finish tip, wide nail tip, hammer head tip, 1/4" plug with cap, oil, wrench, carrying case, and operating manual
|
Three Nailer and Compressor Combo Kit
Model # CFNBNS
COMPRESSOR
- 150 Max PSI allows users to drive more nails than a traditional 135 Max PSI compressor.
- 6 gallon tank allows users to drive a large quantity of nails on a single tank charge.
- 2.6 SCFM at 90 PSI allows for quick compressor recovery time.
- 34 lbs. weight allows compressor to be easily carried.
- 2 quick connect couplers allows two nail guns to be powered by the compressor at the same time.
- Oil-free pump for maintenance free operation.
- 120 volt electric unit allows user to run the compressor on standard household current.
- 10 Amps current draw allows users to use compressor with a 16 guage or heavier extension cord (50 feet or less).
NAILERS
- BN125A uses standard 18 Ga. brads from 5/8" to 1-1/4" long; FN250B uses standard 16 Ga. finish nails from 3/4" to - 2-1/2" long; NS100A uses standard 18 Ga. staples from 1/2" to 1" long.
- Special hardened driver blade allows for maximum durability and reliability.
- Tool free jam release mechanism designed not to block line of sight for uninterrupted work.
- Strong and lightweight die-cast aluminum body for maximum durability and reliability.
- Standard Equipment: 6 gallon, 150 PSI compressor with two couplers; 1-1/4" 18 Ga. brad nailer; 2-1/2" 16 Ga. finish nailer; 1" narrow crown stapler; 40' air hose with coupler and plug; 3,000 fasteners, nailer oil, and canvas carry bag providing users with everything needed packaged in one box for immediate use.
|
Pnuematic Flooring Cleat Nailer
Model # FCN200
- Drives from 1-1/2" to 2" "L" shape cleat nails
- Pneumatic driving action consistently drives fastener for better finished installation
- Unit comes fully assembled and ready for use right out of the box
- Strong, lightweight, die-cast aluminum construction
- Non-Marring base is designed to allow driving of fastener close to wall
- Better balance for stability - tool sits upright for smoother floor installation
- Rear-load gravity fee magazine with a bypass pusher
- Fitting is angled so hose does not interfere with magazine or operator
- Ergonomic design with longer handle for easier use
- Hardened driver blade for longer life
- Provides better holding power while allowing the floor to contract and expand
- Standard Equipment: Nailer, mallet, air tool oil, wrenches, 1/4" industrial male plug, and operating manual
|
| Generators |
| PH350IS 3,500w. Electric Generator w/6.5-HP.Honda Gas Engine |
| PH350IS 3,500 Watt Electric Generator |
| H650IS-W 6,500w. Electric Generator w/13.0-HP. Honda Gas Engine |
| H650IS-W 6,500 Watt Contractor Generator |
| H650CS 6,500 Watt Generator with 13 HP Honda Engine |
| H451CS-W 4,500w. Electric Generator w/9.0-HP. Honda Gas Engine |
| H451CS-W 4,500 Watt Generator with 9 HP Honda Engine and Wheel Kit |
| H450IS-W 4,500w. Electric Generator w/9.0-HP. Honda Gas Engine |
| H450IS-W 4,500 Watt Electric Generator |
| H4186 5250 Watt Electric Generator |
| H1000IS-W 10,000w. Electric Generator w/20.0-HP. Honda Gas Engine |
| H1000IS-W 10,000 Watt Contractor Generator |
| DBSI325 3,250w. Electric Generator w/6.0-HP. Briggs & Stratton Gas Engine |
| CTE300 3,500w. Electric Generator w/ 6.0-HP. Tecumseh Gas Engine |
| CH350IS 3,500w. Electric Generator w/6.5-HP Honda Gas Engine |
| CH250 2,500w. Electric Generator w/5.0-HP Honda Gas Engine |
| BSV750-W 7,500w. Electric Generator w/13.0-HP. Briggs & Stratton Eng. |
| BSV750-W 7,500 Watt Generator With 13 HP Engine |
| BSV550-W 5,550 Watt Electric Generator |
| BSI550-W 5,500w. Electric Generator w/10.0-HP. Briggs & Stratton Eng. |
| BSI525-WH 5250 watt Generator |
| 5,500 Watt Electric Generator |
| 5,250 Watt Electric Generator |
| 3000 Watt Gasoline Generator ETQ - Perfect for RV, Camping, Emergency |
| 10HP 5250W Generator |
|
| Routers & Trimmer Kit |
| H5220 1-3/4 HP VS Router Kit |
| H3725 Speedmatic 3-1/4 HP Plunge Router |
| 97311 Deluxe Laminate Trimmer Kit |
| 97310 Laminate Trimmer Kit |
| 9690LR 10 Amp 1-3/4 Horsepower Fixed Base Router with 1/4-Inch and 1/2-Inch Collets |
| 895PK 12 Amp 2-1/4 Horsepower Plunge Base and Fixed Base Kit with 1/4-Inch and 1/2-Inch Collets |
| 894PK 2-1/4 HP GripVac Base, Plunge Base Kit |
| 893PK 2-1/4 HP Fixed Base, Plunge Base Kit |
| 892 2-1/4 HP Router |
| 8529 2 HP Variable Speed Plunge Router |
| 8529 2 HP Plunge Router - 12 Amp, AC Only, 1/4" & 1/2" Collets, 10,000 RPM - 23,000 RPM |
| 7539 SPEEDMATIC 3-1/4 Peak HP 5-Speed Plunge Router 15A, AC(10K, 13K, 16K, 19K, 21K RPM |
| 7539 3-1/4 HP Speedmatic 5-Speed Plunge Router |
| 7538 SPEEDMATIC 3-1/4 Peak HP Plunge Router -15A, AC, 21K RPM w/ Soft Start, 1/2"Collet |
| 7519 Speedmatic 3-1/4 HP Router |
| 7518 SPEEDMATIC 3-1/4 Peak HP 5-Speed Router - 15 Amp, AC (10K, 13K, 16K, 19K, 21K RPM) |
| 7518 Speedmatic 15 Amp 3-1/4 Horsepower Fixed Base 5-Speed Router |
| 7319 Tilt-Base Laminate Trimmer |
| 7312 Offset Base Laminate Trimmer |
| 7310 5.6 Amp 3/4 Horsepower Laminate Trim Router |
| 694VK 11 Amp 1-3/4 Horsepower Plunge and Fixed Base Variable Speed Router Kit |
| 693LRPK 1-3/4 HP Fixed Router and Plunge Base Kit |
| 691 11 Amp 1-3/4 Horsepower D-Handle Router with 1/4-Inch and 1/2-Inch Collets |
| 691 1-3/4 Peak HP D-Handle Router - 11 Amp, AC Only, 27,500 RPM, 1/4" & 1/2" Collet |
| 690P 1-1/2 HP Router |
| 690LRVS 11 Amp 1-3/4 Horsepower Fixed Base Variable Speed Router |
| 690LR 10 Amp 1-3/4 Fixed Base Horsepower Router |
| 690LR 1-3/4" Peak HP Router - 11 Amp, AC Only, 27,500RPM, 1/4" & 1/2" Collet |
| 309 Laminate Trimmer |
| 0891 2-1/4 HP GripVac Router |
| 0310 Production Laminate Trimmer |
| 0100 7/8 HP Router |
| 97311 Deluxe Laminate Trim Kit |
| 7538 Speedmatic 3-1/4 HP Plunge Router |
| 693LRD 1-3/4HP Router 693 With 3 Bases |
|
| Sanders |
| 9444VS VS PROFILE SANDER KIT |
| 342K 1/4 Sheet Palm Sander Kit |
| 343K 5" Random Orbit Sander Kit - Hook & Loop Pad |
| 343VSK 5" Variable Speed Random Orbit Sander - Hook & Loop Pad |
| 344 5" Random Orbit Sander - PSA Pad |
| 352VS 3" x 21" Variable-Speed Sander |
| 360VS 3"x24" Whisper Series Belt Sander |
| 361 3"x24" Belt Sander |
| 362 4"x24" Belt Sander with Dust Pickup |
| 0332 5" Non-Dustless Sander with Adhesive Pad |
| 0334 Quicksand 2.4 Amp Palm Grip Random Orbit Finishing Sander with Dust Canister |
| 121 6 Amp Hand Held Oscillating Spindle Sander |
| 330 Speed-Bloc 1.2 Amp 1/4 Sheet Sander |
| 333K 2.4 Amp 5-Inch Random Orbit Hook and Loop Sander |
| 340K 2 Amp 1/4 Sheet Palm Grip Sander |
| 352VS 3" x 21" Variable Speed Sander w/ Dust Pickup - 8A, Dial 850-1, 300 SFPM |
| 352VS 8 Amp 3-Inch by 21-Inch Variable Speed Belt Sander with Cloth Dust Bag |
| 360 12 Amp 3-Inch by 24-Inch Belt Sander with Cloth Dust Bag |
| 360VS 12 Amp 3-Inch by 24-Inch Variable Speed Belt Sander |
| 361 12 Amp 3-Inch by 24-Inch Belt Sander |
| 361 3" x 24" Sander - w/ Dust Pickup - 12 Amp, 1500 SFPM |
| 362 12 Amp 4-Inch by 24-Inch Belt Sander with Cloth Dust Bag |
| 362VS 4" x 24" Variable Speed Sander |
| 362VSK 12 Amp 4-Inch by 24-Inch Variable Speed Belt Sander with Case |
| 363 12 Amp 4-Inch by 24-Inch Belt Sander |
| 505 2.3 Amp 1/2 Sheet Finishing Sander |
| 505 Half-Sheet Finishing Sander - 2.3 Amp, AC/DC, 1/8" Orbit, 10,000 OPM |
| 7335 5" Variable Speed Random Orbit Sander Only |
| 7335 5" Random Orbit Variable-Speed Sander - 3.7 Amp, AC Only, 2,500 - 6,000 OPM |
| 7336 6" Variable Speed Random Orbit Sander Only |
| 7800 3.5 Amp Drywall Sander with 13-Foot Hose |
| 9444 1.8 Amp Profile Sander Kit |
| 9444VS 1.8 Amp Variable Speed Profile Sander Kit |
| 97355 5" Variable Speed Random Orbital Sander Kit with Carrying Case and Dust Kit |
| 97366 6" Variable Speed Sander Kit with Dust Collection Hood |
| G4187 5" Random Orbital Sander H&L |
| 9444 Profile Sander Kit |
| PTS1 6-Inch Pnuematic Sander |
| PTS2 1/2 Horsepower 3-Inch, 4-1/2-Inch, and 5-1/2-Inch Pnuematic Sander with 3-Layered-Changeable Pads |
| PTS3 5-Inch Random Orbit Pnuematic Sander not Vacuum with 3/16-Inch Orbit |
| PTS4 5-Inch Random Orbit Pnuematic Sander Vacuum-Ready with 3/16-Inch Orbit |
| PTS5 5-Inch Random Orbit Pnuematic Sander not Vacuum with 3/32-Inch Orbit |
| PTS6 5-Inch Random Orbit Pnuematic Sander Vacuum-Ready with 3/32 Orbit |
| PTS7 6-Inch Random Orbit Pnuematic Sander not Vacuum with 3/16-Inch Orbit |
| PTS8 6-Inch Random Orbit Pnuematic Sander Vacuum-Ready with 3/16-Inch Orbit |
|
Accessories:
Blades |
Air Tool Accessories |
Cordless Tool Accessories |
Hand Tools |
Home Improvement | Circular Saw Blades | Jig Saw Blades | Reciprocating Saw Blades | Miter Saw Blades | Router Accessories | Sander Accessories
Reconditioned Tools:
Air Compressors |
Air Tools | Drills | Routers | Sanders
|
